Email format error
Email cannot be empty
Email already exists
6-20 characters(letters plus numbers only)
The password is inconsistent
Email format error
Email cannot be empty
Email does not exist
6-20 characters(letters plus numbers only)
The password is inconsistent
TRCAK ROLLER
TRCAK ROLLER
(25)
175-30-00489 175-30-00490 KOMASTU Dozer Track Roller D155SF/DF Single/Double Flange Roller 17A-30-00080 17A-30-00070
HIGH QUALITY,HIGH ACCURACY,LONG SERVINCE LIFE. Roller Body:Adopting the good hardenability 40 Mn2 steel through forging.The Heat treatment of tempering and medium-frequency induction surface hardening assure it’s strength and wear resistance. Axle:Adopting 45# steel ,tempering and medium-frequency induction surface hardening.The surface HRC is 52-60, depth of hardening is 3-6mm,comprehensive is good. Floating seal:Adopting cr-al alloy,HRC 65-72,the roughness of working surface 0.1μM-0.2μM O-ring:Adopting the raw material of butadiene-acrylonitrile rubber which is the copolymerization of butane and acrylonitrile into produce.That has better oil resistance and high-temperature resistance. A thorough study of the original drawing, presenting the OEMs (Original Equipment Manufacturers) performance requirements, will allow us to manufacture all the different types of conveyor rollers available on the market. The best solution will be applied to our production line after rigorous analysis of the drawings.
R60-7 Excavator Bottom Roller Track Roller for Hyundai R55-7 81M8-11010 Professional Supplier Undercarriage Parts
HIGH QUALITY,HIGH ACCURACY,LONG SERVINCE LIFE. Roller Body:Adopting the good hardenability 40 Mn2 steel through forging.The Heat treatment of tempering and medium-frequency induction surface hardening assure it’s strength and wear resistance. Axle:Adopting 45# steel ,tempering and medium-frequency induction surface hardening.The surface HRC is 52-60, depth of hardening is 3-6mm,comprehensive is good. Floating seal:Adopting cr-al alloy,HRC 65-72,the roughness of working surface 0.1μM-0.2μM O-ring:Adopting the raw material of butadiene-acrylonitrile rubber which is the copolymerization of butane and acrylonitrile into produce.That has better oil resistance and high-temperature resistance. A thorough study of the original drawing, presenting the OEMs (Original Equipment Manufacturers) performance requirements, will allow us to manufacture all the different types of conveyor rollers available on the market. The best solution will be applied to our production line after rigorous analysis of the drawings.
Komatsu PC200-5 PC200-6 PC200-7 PC200-8 PC220-8 Track Roller Bottom Roller 20Y-30-00010
HIGH QUALITY,HIGH ACCURACY,LONG SERVINCE LIFE. Roller Body:Adopting the good hardenability 40 Mn2 steel through forging.The Heat treatment of tempering and medium-frequency induction surface hardening assure it’s strength and wear resistance. Axle:Adopting 45# steel ,tempering and medium-frequency induction surface hardening.The surface HRC is 52-60, depth of hardening is 3-6mm,comprehensive is good. Floating seal:Adopting cr-al alloy,HRC 65-72,the roughness of working surface 0.1μM-0.2μM O-ring:Adopting the raw material of butadiene-acrylonitrile rubber which is the copolymerization of butane and acrylonitrile into produce.That has better oil resistance and high-temperature resistance. A thorough study of the original drawing, presenting the OEMs (Original Equipment Manufacturers) performance requirements, will allow us to manufacture all the different types of conveyor rollers available on the market. The best solution will be applied to our production line after rigorous analysis of the drawings.
longking60 track roller LG60 Track Roller Bottom Roller Professional Supplier Undercarriage Parts
HIGH QUALITY,HIGH ACCURACY,LONG SERVINCE LIFE. Roller Body:Adopting the good hardenability 40 Mn2 steel through forging.The Heat treatment of tempering and medium-frequency induction surface hardening assure it’s strength and wear resistance. Axle:Adopting 45# steel ,tempering and medium-frequency induction surface hardening.The surface HRC is 52-60, depth of hardening is 3-6mm,comprehensive is good. Floating seal:Adopting cr-al alloy,HRC 65-72,the roughness of working surface 0.1μM-0.2μM O-ring:Adopting the raw material of butadiene-acrylonitrile rubber which is the copolymerization of butane and acrylonitrile into produce.That has better oil resistance and high-temperature resistance. A thorough study of the original drawing, presenting the OEMs (Original Equipment Manufacturers) performance requirements, will allow us to manufacture all the different types of conveyor rollers available on the market. The best solution will be applied to our production line after rigorous analysis of the drawings.
PC60-5/6/7 201-30-00062 Bottom roller track lower roller for komastu Supplier Undercarriage Parts
HIGH QUALITY,HIGH ACCURACY,LONG SERVINCE LIFE. Roller Body:Adopting the good hardenability 40 Mn2 steel through forging.The Heat treatment of tempering and medium-frequency induction surface hardening assure it’s strength and wear resistance. Axle:Adopting 45# steel ,tempering and medium-frequency induction surface hardening.The surface HRC is 52-60, depth of hardening is 3-6mm,comprehensive is good. Floating seal:Adopting cr-al alloy,HRC 65-72,the roughness of working surface 0.1μM-0.2μM O-ring:Adopting the raw material of butadiene-acrylonitrile rubber which is the copolymerization of butane and acrylonitrile into produce.That has better oil resistance and high-temperature resistance. A thorough study of the original drawing, presenting the OEMs (Original Equipment Manufacturers) performance requirements, will allow us to manufacture all the different types of conveyor rollers available on the market. The best solution will be applied to our production line after rigorous analysis of the drawings.
Excavator bottom roller U85 KX185-3 track roller for mini excavator Kubota Professional Supplier Undercarriage Parts
HIGH QUALITY,HIGH ACCURACY,LONG SERVINCE LIFE. Roller Body:Adopting the good hardenability 40 Mn2 steel through forging.The Heat treatment of tempering and medium-frequency induction surface hardening assure it’s strength and wear resistance. Axle:Adopting 45# steel ,tempering and medium-frequency induction surface hardening.The surface HRC is 52-60, depth of hardening is 3-6mm,comprehensive is good. Floating seal:Adopting cr-al alloy,HRC 65-72,the roughness of working surface 0.1μM-0.2μM O-ring:Adopting the raw material of butadiene-acrylonitrile rubber which is the copolymerization of butane and acrylonitrile into produce.That has better oil resistance and high-temperature resistance. A thorough study of the original drawing, presenting the OEMs (Original Equipment Manufacturers) performance requirements, will allow us to manufacture all the different types of conveyor rollers available on the market. The best solution will be applied to our production line after rigorous analysis of the drawings.
For Daewoo Excavator DH80 Lower Roller Track Roller Bottom Roller Top Roller Carrier Roller
HIGH QUALITY,HIGH ACCURACY,LONG SERVINCE LIFE. Roller Body:Adopting the good hardenability 40 Mn2 steel through forging.The Heat treatment of tempering and medium-frequency induction surface hardening assure it’s strength and wear resistance. Axle:Adopting 45# steel ,tempering and medium-frequency induction surface hardening.The surface HRC is 52-60, depth of hardening is 3-6mm,comprehensive is good. Floating seal:Adopting cr-al alloy,HRC 65-72,the roughness of working surface 0.1μM-0.2μM O-ring:Adopting the raw material of butadiene-acrylonitrile rubber which is the copolymerization of butane and acrylonitrile into produce.That has better oil resistance and high-temperature resistance. A thorough study of the original drawing, presenting the OEMs (Original Equipment Manufacturers) performance requirements, will allow us to manufacture all the different types of conveyor rollers available on the market. The best solution will be applied to our production line after rigorous analysis of the drawings.
Track Roller Bottom Roller 9066207 for Hitachi EX60 EX60-3 EX75UR EX60-2 UH033 Professional Supplier Undercarriage Parts
HIGH QUALITY,HIGH ACCURACY,LONG SERVINCE LIFE. Roller Body:Adopting the good hardenability 40 Mn2 steel through forging.The Heat treatment of tempering and medium-frequency induction surface hardening assure it’s strength and wear resistance. Axle:Adopting 45# steel ,tempering and medium-frequency induction surface hardening.The surface HRC is 52-60, depth of hardening is 3-6mm,comprehensive is good. Floating seal:Adopting cr-al alloy,HRC 65-72,the roughness of working surface 0.1μM-0.2μM O-ring:Adopting the raw material of butadiene-acrylonitrile rubber which is the copolymerization of butane and acrylonitrile into produce.That has better oil resistance and high-temperature resistance. A thorough study of the original drawing, presenting the OEMs (Original Equipment Manufacturers) performance requirements, will allow us to manufacture all the different types of conveyor rollers available on the market. The best solution will be applied to our production line after rigorous analysis of the drawings.
Volvo Ec210 Excavator Parts Track Roller Bottom Roller 14573180 From Factory
HIGH QUALITY,HIGH ACCURACY,LONG SERVINCE LIFE. Roller Body:Adopting the good hardenability 40 Mn2 steel through forging.The Heat treatment of tempering and medium-frequency induction surface hardening assure it’s strength and wear resistance. Axle:Adopting 45# steel ,tempering and medium-frequency induction surface hardening.The surface HRC is 52-60, depth of hardening is 3-6mm,comprehensive is good. Floating seal:Adopting cr-al alloy,HRC 65-72,the roughness of working surface 0.1μM-0.2μM O-ring:Adopting the raw material of butadiene-acrylonitrile rubber which is the copolymerization of butane and acrylonitrile into produce.That has better oil resistance and high-temperature resistance. A thorough study of the original drawing, presenting the OEMs (Original Equipment Manufacturers) performance requirements, will allow us to manufacture all the different types of conveyor rollers available on the market. The best solution will be applied to our production line after rigorous analysis of the drawings.
For Caterpillar E312 E311 E313 Track Roller 151-9747 Professional Supplier Undercarriage Parts
A thorough study of the original drawing, presenting the OEMs (Original Equipment Manufacturers) performance requirements, will allow us to manufacture all the different types of conveyor rollers available on the market. The best solution will be applied to our production line after rigorous analysis of the drawings.
OEM Hyundai Excavator R60-7 R55 R60-5 Lower Roller Track roller Supplier Undercarriage Parts
HIGH QUALITY,HIGH ACCURACY,LONG SERVINCE LIFE. Roller Body:Adopting the good hardenability 40 Mn2 steel through forging.The Heat treatment of tempering and medium-frequency induction surface hardening assure it’s strength and wear resistance. Axle:Adopting 45# steel ,tempering and medium-frequency induction surface hardening.The surface HRC is 52-60, depth of hardening is 3-6mm,comprehensive is good. Floating seal:Adopting cr-al alloy,HRC 65-72,the roughness of working surface 0.1μM-0.2μM O-ring:Adopting the raw material of butadiene-acrylonitrile rubber which is the copolymerization of butane and acrylonitrile into produce.That has better oil resistance and high-temperature resistance. A thorough study of the original drawing, presenting the OEMs (Original Equipment Manufacturers) performance requirements, will allow us to manufacture all the different types of conveyor rollers available on the market. The best solution will be applied to our production line after rigorous analysis of the drawings.
Hyundai R220-9S Excavator Track Roller Bottom Roller Lower Roller 81N6-11010
HIGH QUALITY,HIGH ACCURACY,LONG SERVINCE LIFE. Roller Body:Adopting the good hardenability 40 Mn2 steel through forging.The Heat treatment of tempering and medium-frequency induction surface hardening assure it’s strength and wear resistance. Axle:Adopting 45# steel ,tempering and medium-frequency induction surface hardening.The surface HRC is 52-60, depth of hardening is 3-6mm,comprehensive is good. Floating seal:Adopting cr-al alloy,HRC 65-72,the roughness of working surface 0.1μM-0.2μM O-ring:Adopting the raw material of butadiene-acrylonitrile rubber which is the copolymerization of butane and acrylonitrile into produce.That has better oil resistance and high-temperature resistance. A thorough study of the original drawing, presenting the OEMs (Original Equipment Manufacturers) performance requirements, will allow us to manufacture all the different types of conveyor rollers available on the market. The best solution will be applied to our production line after rigorous analysis of the drawings.