CARRIER ROLLER

CARRIER ROLLER

(16)

20Y-30-08050 20Y-30-00481 Carrier top roller for komatsu PC200-7 PC200-8/PC240 Undercarriage Parts Professional Supplier

HIGH QUALITY,HIGH ACCURACY,LONG SERVINCE LIFE. Roller Body:Adopting the good hardenability 40 Mn2 steel through forging. The heat treatment of tempering and medium-frequency induction surface hardening assure it’s strength and wear resistance. The surface HRC IS 52-60, depth of hardening is 8-20mm. Axle:Adopting 45# steel,tempering and medium-frequency induction surface hardening. The surface HRC is 52-60,depth of hardening is 3-6mm,comprehensive is good. Floating seal:Adopting cr-al alloy,HRC 65-72, the roughness of working surface 0.1μM-0.2μM. O-ring:Adopting the raw material of butadiene-acrylonitrile rubber which is the copolymerization of butene and acrylonitrile into produce. That has better oil resistance and high-temperature resistance. The Carrier Roller surface hardness ranges from HRC 50 to 56 ,depth from 8mm to 12mm. A thorough study of the original drawing presenting the performance requirements of the various OEMs (Original Equipment Manufacturers) will allow us to manufacture all the different types of sprockets available on the market. The best solution will be applied to our production line after rigorous analysis of the drawings and heat treatment.

Contact us

Volvo Excavator Carrier Roller Excavator EC250 EC280 EC290 Roller 14545571 14573180 14043992 1181-01011 14527126 Top Roller

HIGH QUALITY,HIGH ACCURACY,LONG SERVINCE LIFE. Roller Body:Adopting the good hardenability 40 Mn2 steel through forging. The heat treatment of tempering and medium-frequency induction surface hardening assure it’s strength and wear resistance. The surface HRC IS 52-60, depth of hardening is 8-20mm. Axle:Adopting 45# steel,tempering and medium-frequency induction surface hardening. The surface HRC is 52-60,depth of hardening is 3-6mm,comprehensive is good. Floating seal:Adopting cr-al alloy,HRC 65-72, the roughness of working surface 0.1μM-0.2μM. O-ring:Adopting the raw material of butadiene-acrylonitrile rubber which is the copolymerization of butene and acrylonitrile into produce. That has better oil resistance and high-temperature resistance. The Carrier Roller surface hardness ranges from HRC 50 to 56 ,depth from 8mm to 12mm. A thorough study of the original drawing presenting the performance requirements of the various OEMs (Original Equipment Manufacturers) will allow us to manufacture all the different types of sprockets available on the market. The best solution will be applied to our production line after rigorous analysis of the drawings and heat treatment.

Contact us

Dozer Excavator SD16/SD22/SD32/D60/D65/D85/D155/PC60/PC120/PC200/PC220/PC300 Undercarriage Parts Carrier Roller

HIGH QUALITY,HIGH ACCURACY,LONG SERVINCE LIFE. Roller Body:Adopting the good hardenability 40 Mn2 steel through forging.The Heat treatment of tempering and medium-frequency induction surface hardening assure it’s strength and wear resistance. Axle:Adopting 45# steel ,tempering and medium-frequency induction surface hardening.The surface HRC is 52-60, depth of hardening is 3-6mm,comprehensive is good. Floating seal:Adopting cr-al alloy,HRC 65-72,the roughness of working surface 0.1μM-0.2μM O-ring:Adopting the raw material of butadiene-acrylonitrile rubber which is the copolymerization of butane and acrylonitrile into produce.That has better oil resistance and high-temperature resistance. A thorough study of the original drawing, presenting the OEMs (Original Equipment Manufacturers) performance requirements, will allow us to manufacture all the different types of conveyor rollers available on the market. The best solution will be applied to our production line after rigorous analysis of the drawings.

Contact us

XE225 XE235 Undercarriage Parts OEM XCMG XE215 Excavator Carrier Roller FOB

HIGH QUALITY,HIGH ACCURACY,LONG SERVINCE LIFE. Roller Body:Adopting the good hardenability 40 Mn2 steel through forging. The heat treatment of tempering and medium-frequency induction surface hardening assure it’s strength and wear resistance. The surface HRC IS 52-60, depth of hardening is 8-20mm. Axle:Adopting 45# steel,tempering and medium-frequency induction surface hardening. The surface HRC is 52-60,depth of hardening is 3-6mm,comprehensive is good. Floating seal:Adopting cr-al alloy,HRC 65-72, the roughness of working surface 0.1μM-0.2μM. O-ring:Adopting the raw material of butadiene-acrylonitrile rubber which is the copolymerization of butene and acrylonitrile into produce. That has better oil resistance and high-temperature resistance. The Carrier Roller surface hardness ranges from HRC 50 to 56 ,depth from 8mm to 12mm. A thorough study of the original drawing presenting the performance requirements of the various OEMs (Original Equipment Manufacturers) will allow us to manufacture all the different types of sprockets available on the market. The best solution will be applied to our production line after rigorous analysis of the drawings and heat treatment.

Contact us

E311 E312 E313 Excavator Chain Upper Roller 50Mn Material Track Roller Professional Supplier Undercarriage Parts 151-9747

HIGH QUALITY,HIGH ACCURACY,LONG SERVINCE LIFE. Roller Body:Adopting the good hardenability 40 Mn2 steel through forging. The heat treatment of tempering and medium-frequency induction surface hardening assure it’s strength and wear resistance. The surface HRC IS 52-60, depth of hardening is 8-20mm. Axle:Adopting 45# steel,tempering and medium-frequency induction surface hardening. The surface HRC is 52-60,depth of hardening is 3-6mm,comprehensive is good. Floating seal:Adopting cr-al alloy,HRC 65-72, the roughness of working surface 0.1μM-0.2μM. O-ring:Adopting the raw material of butadiene-acrylonitrile rubber which is the copolymerization of butene and acrylonitrile into produce. That has better oil resistance and high-temperature resistance. The Carrier Roller surface hardness ranges from HRC 50 to 56 ,depth from 8mm to 12mm. A thorough study of the original drawing presenting the performance requirements of the various OEMs (Original Equipment Manufacturers) will allow us to manufacture all the different types of sprockets available on the market. The best solution will be applied to our production line after rigorous analysis of the drawings and heat treatment.

Contact us

TOP Roller For Daewoo Excavator DH130 DH150 DOOSAN Excavator Undercarriage Parts Carrier Roller

HIGH QUALITY,HIGH ACCURACY,LONG SERVINCE LIFE. Roller Body:Adopting the good hardenability 40 Mn2 steel through forging. The heat treatment of tempering and medium-frequency induction surface hardening assure it’s strength and wear resistance. The surface HRC IS 52-60, depth of hardening is 8-20mm. Axle:Adopting 45# steel,tempering and medium-frequency induction surface hardening. The surface HRC is 52-60,depth of hardening is 3-6mm,comprehensive is good. Floating seal:Adopting cr-al alloy,HRC 65-72, the roughness of working surface 0.1μM-0.2μM. O-ring:Adopting the raw material of butadiene-acrylonitrile rubber which is the copolymerization of butene and acrylonitrile into produce. That has better oil resistance and high-temperature resistance. The Carrier Roller surface hardness ranges from HRC 50 to 56 ,depth from 8mm to 12mm. A thorough study of the original drawing presenting the performance requirements of the various OEMs (Original Equipment Manufacturers) will allow us to manufacture all the different types of sprockets available on the market. The best solution will be applied to our production line after rigorous analysis of the drawings and heat treatment.

Contact us

China Best Carrier Roller ZAX330-5G Top Roller Hitachi Excavator ZX330-3 ZX350-3 ZX270-3 9149839

HIGH QUALITY,HIGH ACCURACY,LONG SERVINCE LIFE. Roller Body:Adopting the good hardenability 40 Mn2 steel through forging. The heat treatment of tempering and medium-frequency induction surface hardening assure it’s strength and wear resistance. The surface HRC IS 52-60, depth of hardening is 8-20mm. Axle:Adopting 45# steel,tempering and medium-frequency induction surface hardening. The surface HRC is 52-60,depth of hardening is 3-6mm,comprehensive is good. Floating seal:Adopting cr-al alloy,HRC 65-72, the roughness of working surface 0.1μM-0.2μM. O-ring:Adopting the raw material of butadiene-acrylonitrile rubber which is the copolymerization of butene and acrylonitrile into produce. That has better oil resistance and high-temperature resistance. The Carrier Roller surface hardness ranges from HRC 50 to 56 ,depth from 8mm to 12mm. A thorough study of the original drawing presenting the performance requirements of the various OEMs (Original Equipment Manufacturers) will allow us to manufacture all the different types of sprockets available on the market. The best solution will be applied to our production line after rigorous analysis of the drawings and heat treatment.

Contact us

Caterpillar E330 E330 carrier roller 6Y-5323 excavator top carrier roller assembly for excavators and bulldozers

HIGH QUALITY,HIGH ACCURACY,LONG SERVINCE LIFE. Roller Body:Adopting the good hardenability 40 Mn2 steel through forging. The heat treatment of tempering and medium-frequency induction surface hardening assure it’s strength and wear resistance. The surface HRC IS 52-60, depth of hardening is 8-20mm. Axle:Adopting 45# steel,tempering and medium-frequency induction surface hardening. The surface HRC is 52-60,depth of hardening is 3-6mm,comprehensive is good. Floating seal:Adopting cr-al alloy,HRC 65-72, the roughness of working surface 0.1μM-0.2μM. O-ring:Adopting the raw material of butadiene-acrylonitrile rubber which is the copolymerization of butene and acrylonitrile into produce. That has better oil resistance and high-temperature resistance. The Carrier Roller surface hardness ranges from HRC 50 to 56 ,depth from 8mm to 12mm. A thorough study of the original drawing presenting the performance requirements of the various OEMs (Original Equipment Manufacturers) will allow us to manufacture all the different types of sprockets available on the market. The best solution will be applied to our production line after rigorous analysis of the drawings and heat treatment.

Contact us

Zax100 Zx200 Zx240 Zax230 Zax250 Excavator Track CARRIER ROLLER 4332040 4360509 4614911 for Hitachi

HIGH QUALITY,HIGH ACCURACY,LONG SERVINCE LIFE. Roller Body:Adopting the good hardenability 40 Mn2 steel through forging. The heat treatment of tempering and medium-frequency induction surface hardening assure it’s strength and wear resistance. The surface HRC IS 52-60, depth of hardening is 8-20mm. Axle:Adopting 45# steel,tempering and medium-frequency induction surface hardening. The surface HRC is 52-60,depth of hardening is 3-6mm,comprehensive is good. Floating seal:Adopting cr-al alloy,HRC 65-72, the roughness of working surface 0.1μM-0.2μM. O-ring:Adopting the raw material of butadiene-acrylonitrile rubber which is the copolymerization of butene and acrylonitrile into produce. That has better oil resistance and high-temperature resistance. The Carrier Roller surface hardness ranges from HRC 50 to 56 ,depth from 8mm to 12mm. A thorough study of the original drawing presenting the performance requirements of the various OEMs (Original Equipment Manufacturers) will allow us to manufacture all the different types of sprockets available on the market. The best solution will be applied to our production line after rigorous analysis of the drawings and heat treatment.

Contact us

Track Roller for Kobelco SK200-3 SK200-5 SK200-6 YN64D00013F1 Professional Supplier Undercarriage Parts

HIGH QUALITY,HIGH ACCURACY,LONG SERVINCE LIFE. Roller Body:Adopting the good hardenability 40 Mn2 steel through forging. The heat treatment of tempering and medium-frequency induction surface hardening assure it’s strength and wear resistance. The surface HRC IS 52-60, depth of hardening is 8-20mm. Axle:Adopting 45# steel,tempering and medium-frequency induction surface hardening. The surface HRC is 52-60,depth of hardening is 3-6mm,comprehensive is good. Floating seal:Adopting cr-al alloy,HRC 65-72, the roughness of working surface 0.1μM-0.2μM. O-ring:Adopting the raw material of butadiene-acrylonitrile rubber which is the copolymerization of butene and acrylonitrile into produce. That has better oil resistance and high-temperature resistance. The Carrier Roller surface hardness ranges from HRC 50 to 56 ,depth from 8mm to 12mm. A thorough study of the original drawing presenting the performance requirements of the various OEMs (Original Equipment Manufacturers) will allow us to manufacture all the different types of sprockets available on the market. The best solution will be applied to our production line after rigorous analysis of the drawings and heat treatment.

Contact us

High Quality PC360 PC300-6 Carrier Top Roller Excavator undercarriage parts 208-30-00320

HIGH QUALITY,HIGH ACCURACY,LONG SERVINCE LIFE. Roller Body:Adopting the good hardenability 40 Mn2 steel through forging. The heat treatment of tempering and medium-frequency induction surface hardening assure it’s strength and wear resistance. The surface HRC IS 52-60, depth of hardening is 8-20mm. Axle:Adopting 45# steel,tempering and medium-frequency induction surface hardening. The surface HRC is 52-60,depth of hardening is 3-6mm,comprehensive is good. Floating seal:Adopting cr-al alloy,HRC 65-72, the roughness of working surface 0.1μM-0.2μM. O-ring:Adopting the raw material of butadiene-acrylonitrile rubber which is the copolymerization of butene and acrylonitrile into produce. That has better oil resistance and high-temperature resistance. The Carrier Roller surface hardness ranges from HRC 50 to 56 ,depth from 8mm to 12mm. A thorough study of the original drawing presenting the performance requirements of the various OEMs (Original Equipment Manufacturers) will allow us to manufacture all the different types of sprockets available on the market. The best solution will be applied to our production line after rigorous analysis of the drawings and heat treatment.

Contact us

Excavator undercarriage parts 9234984 pc200-6 pc200-5 pc220-5 carrier top roller for komatsu PC200-8 PC220-8

HIGH QUALITY,HIGH ACCURACY,LONG SERVINCE LIFE. Roller Body:Adopting the good hardenability 40 Mn2 steel through forging. The heat treatment of tempering and medium-frequency induction surface hardening assure it’s strength and wear resistance. The surface HRC IS 52-60, depth of hardening is 8-20mm. Axle:Adopting 45# steel,tempering and medium-frequency induction surface hardening. The surface HRC is 52-60,depth of hardening is 3-6mm,comprehensive is good. Floating seal:Adopting cr-al alloy,HRC 65-72, the roughness of working surface 0.1μM-0.2μM. O-ring:Adopting the raw material of butadiene-acrylonitrile rubber which is the copolymerization of butene and acrylonitrile into produce. That has better oil resistance and high-temperature resistance. The Carrier Roller surface hardness ranges from HRC 50 to 56 ,depth from 8mm to 12mm. A thorough study of the original drawing presenting the performance requirements of the various OEMs (Original Equipment Manufacturers) will allow us to manufacture all the different types of sprockets available on the market. The best solution will be applied to our production line after rigorous analysis of the drawings and heat treatment.

Contact us
Contact us
Name

Name can't be empty

* Email

Email can't be empty

Phone

Phone can't be empty

Company

Company can't be empty

* Message

Message can't be empty

Submit