Email format error
Email cannot be empty
Email already exists
6-20 characters(letters plus numbers only)
The password is inconsistent
Email format error
Email cannot be empty
Email does not exist
6-20 characters(letters plus numbers only)
The password is inconsistent
CARRIER ROLLER
CARRIER ROLLER
(16)
Caterpillar E330 E330 carrier roller 6Y-5323 excavator top carrier roller assembly for excavators and bulldozers
HIGH QUALITY,HIGH ACCURACY,LONG SERVINCE LIFE. Roller Body:Adopting the good hardenability 40 Mn2 steel through forging. The heat treatment of tempering and medium-frequency induction surface hardening assure it’s strength and wear resistance. The surface HRC IS 52-60, depth of hardening is 8-20mm. Axle:Adopting 45# steel,tempering and medium-frequency induction surface hardening. The surface HRC is 52-60,depth of hardening is 3-6mm,comprehensive is good. Floating seal:Adopting cr-al alloy,HRC 65-72, the roughness of working surface 0.1μM-0.2μM. O-ring:Adopting the raw material of butadiene-acrylonitrile rubber which is the copolymerization of butene and acrylonitrile into produce. That has better oil resistance and high-temperature resistance. The Carrier Roller surface hardness ranges from HRC 50 to 56 ,depth from 8mm to 12mm. A thorough study of the original drawing presenting the performance requirements of the various OEMs (Original Equipment Manufacturers) will allow us to manufacture all the different types of sprockets available on the market. The best solution will be applied to our production line after rigorous analysis of the drawings and heat treatment.
China Best Carrier Roller ZAX330-5G Top Roller Hitachi Excavator ZX330-3 ZX350-3 ZX270-3 9149839
HIGH QUALITY,HIGH ACCURACY,LONG SERVINCE LIFE. Roller Body:Adopting the good hardenability 40 Mn2 steel through forging. The heat treatment of tempering and medium-frequency induction surface hardening assure it’s strength and wear resistance. The surface HRC IS 52-60, depth of hardening is 8-20mm. Axle:Adopting 45# steel,tempering and medium-frequency induction surface hardening. The surface HRC is 52-60,depth of hardening is 3-6mm,comprehensive is good. Floating seal:Adopting cr-al alloy,HRC 65-72, the roughness of working surface 0.1μM-0.2μM. O-ring:Adopting the raw material of butadiene-acrylonitrile rubber which is the copolymerization of butene and acrylonitrile into produce. That has better oil resistance and high-temperature resistance. The Carrier Roller surface hardness ranges from HRC 50 to 56 ,depth from 8mm to 12mm. A thorough study of the original drawing presenting the performance requirements of the various OEMs (Original Equipment Manufacturers) will allow us to manufacture all the different types of sprockets available on the market. The best solution will be applied to our production line after rigorous analysis of the drawings and heat treatment.
EC460 Carrier Roller Excavator Undercarriage Part Volvo 460 Bottom Roller 1081-01800 Professional Supplier Undercarriage Parts
HIGH QUALITY,HIGH ACCURACY,LONG SERVINCE LIFE. Roller Body:Adopting the good hardenability 40 Mn2 steel through forging. The heat treatment of tempering and medium-frequency induction surface hardening assure it’s strength and wear resistance. The surface HRC IS 52-60, depth of hardening is 8-20mm. Axle:Adopting 45# steel,tempering and medium-frequency induction surface hardening. The surface HRC is 52-60,depth of hardening is 3-6mm,comprehensive is good. Floating seal:Adopting cr-al alloy,HRC 65-72, the roughness of working surface 0.1μM-0.2μM. O-ring:Adopting the raw material of butadiene-acrylonitrile rubber which is the copolymerization of butene and acrylonitrile into produce. That has better oil resistance and high-temperature resistance. The Carrier Roller surface hardness ranges from HRC 50 to 56 ,depth from 8mm to 12mm. A thorough study of the original drawing presenting the performance requirements of the various OEMs (Original Equipment Manufacturers) will allow us to manufacture all the different types of sprockets available on the market. The best solution will be applied to our production line after rigorous analysis of the drawings and heat treatment.
XE225 XE235 Undercarriage Parts OEM XCMG XE215 Excavator Carrier Roller FOB
HIGH QUALITY,HIGH ACCURACY,LONG SERVINCE LIFE. Roller Body:Adopting the good hardenability 40 Mn2 steel through forging. The heat treatment of tempering and medium-frequency induction surface hardening assure it’s strength and wear resistance. The surface HRC IS 52-60, depth of hardening is 8-20mm. Axle:Adopting 45# steel,tempering and medium-frequency induction surface hardening. The surface HRC is 52-60,depth of hardening is 3-6mm,comprehensive is good. Floating seal:Adopting cr-al alloy,HRC 65-72, the roughness of working surface 0.1μM-0.2μM. O-ring:Adopting the raw material of butadiene-acrylonitrile rubber which is the copolymerization of butene and acrylonitrile into produce. That has better oil resistance and high-temperature resistance. The Carrier Roller surface hardness ranges from HRC 50 to 56 ,depth from 8mm to 12mm. A thorough study of the original drawing presenting the performance requirements of the various OEMs (Original Equipment Manufacturers) will allow us to manufacture all the different types of sprockets available on the market. The best solution will be applied to our production line after rigorous analysis of the drawings and heat treatment.
Top Roller EC210B-LC EC240 EC220DL EC140B-LCM EC160B EC180B Shaft 57mm Professional Supplier Undercarriage Parts
HIGH QUALITY,HIGH ACCURACY,LONG SERVINCE LIFE. Roller Body:Adopting the good hardenability 40 Mn2 steel through forging. The heat treatment of tempering and medium-frequency induction surface hardening assure it’s strength and wear resistance. The surface HRC IS 52-60, depth of hardening is 8-20mm. Axle:Adopting 45# steel,tempering and medium-frequency induction surface hardening. The surface HRC is 52-60,depth of hardening is 3-6mm,comprehensive is good. Floating seal:Adopting cr-al alloy,HRC 65-72, the roughness of working surface 0.1μM-0.2μM. O-ring:Adopting the raw material of butadiene-acrylonitrile rubber which is the copolymerization of butene and acrylonitrile into produce. That has better oil resistance and high-temperature resistance. The Carrier Roller surface hardness ranges from HRC 50 to 56 ,depth from 8mm to 12mm. A thorough study of the original drawing presenting the performance requirements of the various OEMs (Original Equipment Manufacturers) will allow us to manufacture all the different types of sprockets available on the market. The best solution will be applied to our production line after rigorous analysis of the drawings and heat treatment.
High Quality PC360 PC300-6 Carrier Top Roller Excavator undercarriage parts 208-30-00320
HIGH QUALITY,HIGH ACCURACY,LONG SERVINCE LIFE. Roller Body:Adopting the good hardenability 40 Mn2 steel through forging. The heat treatment of tempering and medium-frequency induction surface hardening assure it’s strength and wear resistance. The surface HRC IS 52-60, depth of hardening is 8-20mm. Axle:Adopting 45# steel,tempering and medium-frequency induction surface hardening. The surface HRC is 52-60,depth of hardening is 3-6mm,comprehensive is good. Floating seal:Adopting cr-al alloy,HRC 65-72, the roughness of working surface 0.1μM-0.2μM. O-ring:Adopting the raw material of butadiene-acrylonitrile rubber which is the copolymerization of butene and acrylonitrile into produce. That has better oil resistance and high-temperature resistance. The Carrier Roller surface hardness ranges from HRC 50 to 56 ,depth from 8mm to 12mm. A thorough study of the original drawing presenting the performance requirements of the various OEMs (Original Equipment Manufacturers) will allow us to manufacture all the different types of sprockets available on the market. The best solution will be applied to our production line after rigorous analysis of the drawings and heat treatment.
Track Roller for Kobelco SK200-3 SK200-5 SK200-6 YN64D00013F1 Professional Supplier Undercarriage Parts
HIGH QUALITY,HIGH ACCURACY,LONG SERVINCE LIFE. Roller Body:Adopting the good hardenability 40 Mn2 steel through forging. The heat treatment of tempering and medium-frequency induction surface hardening assure it’s strength and wear resistance. The surface HRC IS 52-60, depth of hardening is 8-20mm. Axle:Adopting 45# steel,tempering and medium-frequency induction surface hardening. The surface HRC is 52-60,depth of hardening is 3-6mm,comprehensive is good. Floating seal:Adopting cr-al alloy,HRC 65-72, the roughness of working surface 0.1μM-0.2μM. O-ring:Adopting the raw material of butadiene-acrylonitrile rubber which is the copolymerization of butene and acrylonitrile into produce. That has better oil resistance and high-temperature resistance. The Carrier Roller surface hardness ranges from HRC 50 to 56 ,depth from 8mm to 12mm. A thorough study of the original drawing presenting the performance requirements of the various OEMs (Original Equipment Manufacturers) will allow us to manufacture all the different types of sprockets available on the market. The best solution will be applied to our production line after rigorous analysis of the drawings and heat treatment.
For KATO HD1430 HD1250 Excavator Bottom Roller Forged Steel Dozer Track Rollers
HIGH QUALITY,HIGH ACCURACY,LONG SERVINCE LIFE. Roller Body:Adopting the good hardenability 40 Mn2 steel through forging. The heat treatment of tempering and medium-frequency induction surface hardening assure it’s strength and wear resistance. The surface HRC IS 52-60, depth of hardening is 8-20mm. Axle:Adopting 45# steel,tempering and medium-frequency induction surface hardening. The surface HRC is 52-60,depth of hardening is 3-6mm,comprehensive is good. Floating seal:Adopting cr-al alloy,HRC 65-72, the roughness of working surface 0.1μM-0.2μM. O-ring:Adopting the raw material of butadiene-acrylonitrile rubber which is the copolymerization of butene and acrylonitrile into produce. That has better oil resistance and high-temperature resistance. The Carrier Roller surface hardness ranges from HRC 50 to 56 ,depth from 8mm to 12mm. A thorough study of the original drawing presenting the performance requirements of the various OEMs (Original Equipment Manufacturers) will allow us to manufacture all the different types of sprockets available on the market. The best solution will be applied to our production line after rigorous analysis of the drawings and heat treatment.
Zax100 Zx200 Zx240 Zax230 Zax250 Excavator Track CARRIER ROLLER 4332040 4360509 4614911 for Hitachi
HIGH QUALITY,HIGH ACCURACY,LONG SERVINCE LIFE. Roller Body:Adopting the good hardenability 40 Mn2 steel through forging. The heat treatment of tempering and medium-frequency induction surface hardening assure it’s strength and wear resistance. The surface HRC IS 52-60, depth of hardening is 8-20mm. Axle:Adopting 45# steel,tempering and medium-frequency induction surface hardening. The surface HRC is 52-60,depth of hardening is 3-6mm,comprehensive is good. Floating seal:Adopting cr-al alloy,HRC 65-72, the roughness of working surface 0.1μM-0.2μM. O-ring:Adopting the raw material of butadiene-acrylonitrile rubber which is the copolymerization of butene and acrylonitrile into produce. That has better oil resistance and high-temperature resistance. The Carrier Roller surface hardness ranges from HRC 50 to 56 ,depth from 8mm to 12mm. A thorough study of the original drawing presenting the performance requirements of the various OEMs (Original Equipment Manufacturers) will allow us to manufacture all the different types of sprockets available on the market. The best solution will be applied to our production line after rigorous analysis of the drawings and heat treatment.
Excavator undercarriage parts 9234984 pc200-6 pc200-5 pc220-5 carrier top roller for komatsu PC200-8 PC220-8
HIGH QUALITY,HIGH ACCURACY,LONG SERVINCE LIFE. Roller Body:Adopting the good hardenability 40 Mn2 steel through forging. The heat treatment of tempering and medium-frequency induction surface hardening assure it’s strength and wear resistance. The surface HRC IS 52-60, depth of hardening is 8-20mm. Axle:Adopting 45# steel,tempering and medium-frequency induction surface hardening. The surface HRC is 52-60,depth of hardening is 3-6mm,comprehensive is good. Floating seal:Adopting cr-al alloy,HRC 65-72, the roughness of working surface 0.1μM-0.2μM. O-ring:Adopting the raw material of butadiene-acrylonitrile rubber which is the copolymerization of butene and acrylonitrile into produce. That has better oil resistance and high-temperature resistance. The Carrier Roller surface hardness ranges from HRC 50 to 56 ,depth from 8mm to 12mm. A thorough study of the original drawing presenting the performance requirements of the various OEMs (Original Equipment Manufacturers) will allow us to manufacture all the different types of sprockets available on the market. The best solution will be applied to our production line after rigorous analysis of the drawings and heat treatment.
TOP Roller For Daewoo Excavator DH130 DH150 DOOSAN Excavator Undercarriage Parts Carrier Roller
HIGH QUALITY,HIGH ACCURACY,LONG SERVINCE LIFE. Roller Body:Adopting the good hardenability 40 Mn2 steel through forging. The heat treatment of tempering and medium-frequency induction surface hardening assure it’s strength and wear resistance. The surface HRC IS 52-60, depth of hardening is 8-20mm. Axle:Adopting 45# steel,tempering and medium-frequency induction surface hardening. The surface HRC is 52-60,depth of hardening is 3-6mm,comprehensive is good. Floating seal:Adopting cr-al alloy,HRC 65-72, the roughness of working surface 0.1μM-0.2μM. O-ring:Adopting the raw material of butadiene-acrylonitrile rubber which is the copolymerization of butene and acrylonitrile into produce. That has better oil resistance and high-temperature resistance. The Carrier Roller surface hardness ranges from HRC 50 to 56 ,depth from 8mm to 12mm. A thorough study of the original drawing presenting the performance requirements of the various OEMs (Original Equipment Manufacturers) will allow us to manufacture all the different types of sprockets available on the market. The best solution will be applied to our production line after rigorous analysis of the drawings and heat treatment.
Top Roller DX225LC DX235LCR DX255LC DX220 DX260 Shaft 47mm Professional Supplier Undercarriage Parts
HIGH QUALITY,HIGH ACCURACY,LONG SERVINCE LIFE. Roller Body:Adopting the good hardenability 40 Mn2 steel through forging. The heat treatment of tempering and medium-frequency induction surface hardening assure it’s strength and wear resistance. The surface HRC IS 52-60, depth of hardening is 8-20mm. Axle:Adopting 45# steel,tempering and medium-frequency induction surface hardening. The surface HRC is 52-60,depth of hardening is 3-6mm,comprehensive is good. Floating seal:Adopting cr-al alloy,HRC 65-72, the roughness of working surface 0.1μM-0.2μM. O-ring:Adopting the raw material of butadiene-acrylonitrile rubber which is the copolymerization of butene and acrylonitrile into produce. That has better oil resistance and high-temperature resistance. The Carrier Roller surface hardness ranges from HRC 50 to 56 ,depth from 8mm to 12mm. A thorough study of the original drawing presenting the performance requirements of the various OEMs (Original Equipment Manufacturers) will allow us to manufacture all the different types of sprockets available on the market. The best solution will be applied to our production line after rigorous analysis of the drawings and heat treatment.